Display assembly, Removing the display assembly – Dell Vostro 1200 (Early 2009) User Manual
Page 12
Back to Contents Page
Display Assembly
Dell™ Vostro™ 1200 Service Manual
Replacing the Display Assembly
Removing the Display Panel Bracket
Replacing the Display Panel Bracket
Removing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the hinge cover (see
Removing the Hinge Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Disconnect the display cable from the display cable connector on the system board.
6.
Disconnect the three Mini Card antenna cables (see
Mini Cards
) on the bottom of the computer, pull the cables up through the system board, and
unroute the cables.
7.
Disconnect the left and right microphone cables.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 display cable connector
2 Mini Card antenna cables (3)