Dell OptiPlex G1 User Manual
Page 18

xx
Configuration Settings Dialog Box for Assigning an IRQ Line . . . . . . 3-7
Available Settings List Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Specify Interrupt Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Specify Interrupt List Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Specify I/O Port Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Figure 3-10. System Resource Usage Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . 3-14
Figure 3-11. Card Resource Usage Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
I/O Ports and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Removing the Computer Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Replacing the Computer Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Computer Orientation View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Inside the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
System Board Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Removing the Expansion-Card Cage . . . . . . . . . . . . . . . . . . . . . . . . 5-13
Rotating the Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
System Board Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Expansion Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Riser-Board Expansion-Card Connectors . . . . . . . . . . . . . . . . . . . . 6-4
Removing the Filler Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
Installing an Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
DIMMs and DIMM Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Installing a DIMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Removing a DIMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Installing a Video-Memory Upgrade Module . . . . . . . . . . . . . . . . . . 6-12
Figure 6-10. Disconnecting the Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Figure 6-11. Disconnecting the Microprocessor Using the
Tabbed Guide-Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15
Figure 6-12. System Battery and Battery Socket . . . . . . . . . . . . . . . . . . . . . . . . 6-18
Removing the Front Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Removing the Front-Panel Insert for a 5.25-Inch Bay . . . . . . . . . . . . 7-3
DC Power Cable Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Drive Interface Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Removing a Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Attaching the Drive Bracket to the New Drive . . . . . . . . . . . . . . . . . 7-7
Inserting the New Drive Into the Drive Bay. . . . . . . . . . . . . . . . . . . . 7-7
Attaching Diskette Drive or Tape Drive Cables . . . . . . . . . . . . . . . . . 7-8
Figure 7-10. Removing the Hard-Disk Drive Bracket . . . . . . . . . . . . . . . . . . . . . . 7-11