Dell OptiPlex G1 User Manual
Page 137

ISA Configuration Utility Messages
B-3
7KLVGHYLFHLV
XQFRQILJXUDEOH
EHFDXVHRID
UHVRXUFHFRQIOLFW
ZLWKFDUG
FDUGBQDPH7KH
FRQIOLFWLQJ
UHVRXUFHLV
UHVRXUFHBQDPH7R
IL[UHFRQILJXUH
WKHFRQIOLFWLQJ
FDUG
The selected card is un-
configurable because one
of its resources is already
being used by another
device.
Perform the following procedure:
0DNHDQRWHRIWKHFDUGQDPHDQGWKH
W\SHRIFRQIOLFWLQJUHVRXUFH
)ROORZWKHSURFHGXUHLQ´0RGLI\LQJD
&DUGµLQ&KDSWHUDQGFKDQJHWKH
YDOXHIRUUHVRXUFHBQDPHXVHGE\
FDUGBQDPH
7KH,&8KDVVXF
FHVVIXOO\FRQILJ
XUHGDOO3OXJDQG
3OD\FDUGVLQ
\RXUV\VWHP)RU
WKHQHZFRQILJX
UDWLRQWRWDNH
HIIHFWVDYHWKH
FRQILJXUDWLRQ
WKHQUHERRW\RXU
V\VWHP
The ICU has successfully
configured all of the Plug
and Play expansion cards
that were not configured
by the Configuration
Manager.
To accept these settings, save the configuration
information into NVRAM by selecting Exit from the
File menu and then selecting Yes to save. You
must reboot your system for these settings to take
effect.
7KHORDGHGFDUG
LVQRWDFDWHJRU\
FDUG3UHVV2.WR
SURFHHG
The category you have
chosen is not the correct
category under which to
add this card.
Select OK. The ICU automatically opens the
correct category’s dialog box. Continue the proce-
dure for adding the card as described in “Adding a
Listed Card” or “Adding an Unlisted Card” in
Chapter 3.
1RPRUH'0$YDO
XHVFDQEHDGGHG
1RPRUHLQWHUUXSW
YDOXHVFDQEH
DGGHG
1RPRUHPHPRU\
YDOXHVFDQEH
DGGHG
1RPRUH,2SRUW
YDOXHVFDQEH
DGGHG
No more values are avail-
able for the resource you
are trying to add or
modify.
The maximum number of values for each resource
is as follows:
4 DMA channels
7 IRQ lines
9 memory address blocks
20 I/O ports
To free values for the resource you are trying to
add or modify, delete some of the values listed in
the resource box for the card. If your card requires
all of the values listed, contact your card manufac-
turer to resolve the issue.
7DEOH%&RQILJXUDWLRQ8WLOLW\0HVVDJHVFRQWLQXHG
0HVVDJH
3UREDEOH&DXVH
&RUUHFWLYH$FWLRQ
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User’s Guide.