Dell OptiPlex G1 User Manual
Page 141

ISA Configuration Utility Messages
B-7
2QHRUPRUHDFWLYH
GHYLFHVKDYHEHHQ
UHFRQILJXUHGV\VWHP
UHTXLUHVUHERRW3UHVV
DQ\NH\WRUHERRW
V\VWHP
You modified the
resource values of one or
more PCI or Plug and
Play ISA expansion cards.
Reboot the system to reconfigure the
card(s).
7KH3OXJDQG3OD\,6$
FDUGKDVEHHQVXFFHVV
IXOO\FRQILJXUHG
&DUG&RXQW3OXJDQG
3OD\,6$FDUGVKDYH
EHHQVXFFHVVIXOO\
FRQILJXUHG
The Configuration Man-
ager has successfully
configured the given
number of cards.
If this message does not match the num-
ber of Plug and Play ISA expansion cards
installed in your computer, reinstall any
Plug and Play expansion cards not listed
and reboot the system.
(5525,QVXIILFLHQW&0
0HPRU\
There is not enough
memory available to the
Configuration Manager
for it to run.
Disable any TSR programs or any
unneeded device drivers.
(5525)DWDO%,26
HUURU,QWHUQDO(UURU
&RGH
A BIOS call failed with an
internal error. The most
likely cause is an incom-
patibility between the
BIOS and the Configura-
tion Manager.
See the chapter titled “Getting Help” in
your
Diagnostics and Troubleshooting
Guide for instructions on obtaining techni-
cal assistance.
(5525&RXOGQRWUHDG
196(UURU ,QWHUQDO
(UURU&RGH
An attempt to read the
NVRAM failed.
See the chapter titled “Getting Help” in
your
Diagnostics and Troubleshooting
Guide for instructions.
(5525)DLOHG196
ZULWH(UURU ,QWHUQDO
(UURU&RGH
An attempt to write to
NVRAM failed.
Run the Dell Diagnostics to verify the
integrity of your system NVRAM. See the
chapter titled “Running the Dell Diagnos-
tics” in your
Diagnostics and Troubleshooting
Guide for instructions.
If you are unable to determine the cause of
the error, see the chapter titled “Getting
Help” in your
Diagnostics and Troubleshoot-
ing Guide for instructions.
7DEOH%&RQILJXUDWLRQ0DQDJHU0HVVDJHVFRQWLQXHG
0HVVDJH
3UREDEOH&DXVH
&RUUHFWLYH$FWLRQ
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User’s Guide.