Dell S320wi Projector - Manual (Page 83)

Presentation to Go (PtG) Installation
Minimum system requirements to install PtG are as follow:
Operating System:
- Windows
Microsoft Windows XP™ Home or Professional Service pack 2/3 (32-bit
recommended), Windows ® Vista 32-bit, or Windows ® 7 Home or Professional
32-bit or 64-bit
- Office 2003 or Office 2007
NOTE: Presentation to Go (PtG) installation steps are the same for the S320 and
S320wi models.
In order to use your USB Viewer, you need to complete the steps below:
1 Install the optional wireless module kit. See "Installing the Optional
Wireless Module Kit" on page 14.
NOTE: Wireless module kit embedded for S320wi (optional in S320).
2 Plug the USB Flash to your projector.
NOTE:
• Only supports the JPEG format photo within 10 Mb x 40 M pixels.
• The PtG converter can convert your PowerPoint files into PtG files. See
"Using the PtG Converter" on page 87.
• You can download the "PtG Converter - Lite" in the Dell Support website at:
support.dell.com.
3 At INPUT SOURCE menu, select Wireless/USB and then select USB
Viewer on the sub-menu. See "INPUT SOURCE WIRELESS/USB" on
page 52.
NOTE: When the Wireless and LAN function is disabled, go to LAN Settings
menu, select the "Enabled" in the "Wireless and LAN" option to re-activate the
Wireless and LAN function.
Using Your Projector 83