beautypg.com

Dell S320wi Projector User Manual

Page 129

background image

Problem

(continued)

Possible Solution

(continued)

TEMP light is solid amber

The projector has overheated. The display

automatically shuts down. Turn the display on

again after the projector cools down. If the

problem persists, contact Dell™.

TEMP light is blinking amber If the projector fan fails, the projector will

automatically shut down. Try to clear the

projector mode by pressing and holding the

Power button for 10 seconds. Please wait for

about 5 minutes and try to power up again. If

the problem persists, contact Dell™.

The OSD does not appear on Try to press the Menu button on the panel for

the screen

15 seconds to unlock the OSD. Check the

Menu Lock on page 65.

The remote control is not

The battery may be low. If so, replace with two

operating smoothly or works

new AAA batteries.

only within a limited range

Troubleshooting Your Projector

129

This manual is related to the following products: