Dell S320wi Projector - Manual (Page 29)

NOTE: Interactive module kit is not shipped with your S320 projector. If you
want to use the Interactive feature, see "Installing the Optional Interactive
Module Kit" on page 15. You can purchase it on the Dell website at
www.dell.com.
NOTE:
1 Interactivity is supported only in the following input modes: VGA and HDMI
from a PC, and Wireless Display, USB Display, and LAN Display.
2 To enable Interactive Pen, the 2nd connection between computer and
projector is required. There are four options available for your computer and
projector connections:
a use a Mini USB cable or Dell Interactive wireless dongle (optional)
Dell Interactive wireless dongle is not shipped with your S320 or S320wi
projector. If you want to use Dell Interactive wireless dongle to connect the
computer and the projector, you can purchase it on the Dell website at
www.dell.com.
b use a LAN cable (need to install the Dell Wireless Application Software)
c use WLAN (need to install the Dell Wireless Application Software)
If you use a LAN or WLAN connection, ensure that Wireless/LAN is turned
on first.
3 If the distance between your computer/laptop and projector is over 5 meters,
a USB hub is recommended for your installation.
Connecting Your Projector 29