Dell S320wi Projector - Manual (Page 56)

The image settings menu provides the following options:
C OLOR T EMPERATURE —Allows you to adjust the color temperature. The screen
appears cooler at higher color temperatures and warmer at lower color
temperatures. When you adjust the values in the Color Adjust menu, the
Custom mode is activated. The values are saved in the Custom mode.
RGB C
OLOR A DJUST —Allows you to manually adjust the colors red, green,
and blue.
S
ATURATION —Allows you to adjust the video source from black and white to
fully saturated color. Press to increase the amount of color in the image
and to decrease the amount of color in the image.
S HARPNESS —Press to increase the sharpness and to decrease the
sharpness.
T
INT —Press to increase the amount of green in the image and to
decrease the amount of green in the image (available for NTSC only).
W
HITE I NTENSITY —Press and use and to display white intensity.
C OLOR S PACE —Allows you to select the color space. The options are: RGB,
YCbCr, and YPbPr.
VGA O
UTPUT —Select On or Off the VGA output function at projector
standby status. Default is Off.
NOTE:
1 If you adjust the settings for Color Temperature, RGB Color Adjust, Saturation,
Sharpness, Tint, and White Intensity the projector automatically switch to
Custom mode.
2 Saturation, Sharpness, and Tint only available when the input source is from
Composite or S-Video.
I MAGE S ETTINGS (N O I NPUT S OURCE )—Select and press to activate image settings.
Using Your Projector 56