beautypg.com

Guiding signals, Ng signals" on, 132 troubleshooting your projector – Dell S320wi Projector User Manual

Page 132

background image

Guiding Signals

Control Buttons

Indicator

Projector

Status

Description

Power

TEMP

(Amber)

LAMP

(Amber)

Standby mode

Projector in Standby mode. Ready to

power on.

BLUE

Flashing

OFF

OFF

Warming up

mode

Projector takes some time to warm up

and power on.

BLUE

OFF

OFF

Lamp on

Projector in Normal mode, ready to

display an image.

Note: The OSD menu is not

accessed.

BLUE

BLUE

OFF

OFF

OFF

OFF

Cooling mode

Cooling before

Power Saving

mode

Projector is cooling to shutdown.

The projector takes 60 seconds to cool

down before entering Power Saving

mode.

AMBER

OFF

OFF

Projector

overheated

Air vents might be blocked or ambient

temperature may be above 35 ºC. The

projector automatically shuts down.

Ensure that the air vents are not blocked

OFF

AMBER

OFF

and that the ambient temperature is

within operational range. If the problem

persists, contact Dell.

Lamp driver

overheated

The lamp driver is overheated. The air

vents may be blocked. The projector

automatically shuts down. Turn the

display on again after the projector cools

down. If the problem persists, contact

Dell.

Fan breakdown One of the fans has failed. The projector

automatically shuts down. If the problem

persists, contact Dell.

Lamp driver

breakdown

The lamp driver has failed. The projector

automatically shuts down. Unplug the

power cord after three minutes and then

turn the display on again. If this problem

persists, contact Dell.

Color Wheel

breakdown

Color wheel cannot start. The projector

has failed and the projector

automatically shuts down. Unplug the

power cord after three minutes and then

turn on the projector. If this problem

persists, contact Dell.

Lamp failure

Lamp is defective. Replace the lamp.

Fault - DC

supply (+12V)

Power supply has been interrupted. The

projector automatically shuts down.

Unplug the power cord after three

minutes and then turn on the projector.

If this problem persists, contact Dell.

Lamp module

connection

failed

Lamp module connection may be

disrupted. Check the lamp module and

ensure that it is properly installed. If the

problem persists, contact Dell.

AMBER

OFF

AMBER

Flashing

BLUE

OFF

AMBER

Flashing

OFF

AMBER

AMBER

Flashing

OFF

AMBER

Flashing

OFF

AMBER

OFF

OFF

OFF

AMBER

Flashing

AMBER

Flashing

AMBER

AMBER

AMBER

Flashing

132

Troubleshooting Your Projector

This manual is related to the following products: