Enable wireless on the projector – Dell S320wi Projector User Manual
Page 75
Enable Wireless on the Projector
In order to use your projector wirelessly, you need to complete the steps below:
1 Install the optional wireless module kit (optional in S320). See "Installing the
Optional Wireless Module Kit" on page 14.
NOTE:
Wireless module kit embedded for S320wi.
2 Connect the power cable to the wall outlet and press the power button.
3 Press the Menu button on your projector control panel or remote control.
NOTE:
Use
,
,
and
buttons to navigate and
to select.
4 Access the INPUT SOURCE menu, select Wireless/USB and then select
Wireless Display on the sub-menu. See "INPUT SOURCE
Using Your Projector
75
This manual is related to the following products: