Dell PowerVault DR2000v - Manual (Page 11)

ID Issue Workaround
12595 Our GUI allows a seven-character password;
however, the RDA with OST requires an eight-
character password. If you want the RDA with OST user and GUI passwords to
match, then use an eight-character password as required
for the RDA with OST user.
9433 Global hot spare is not automatically
configured after replacing the GHS drive in
slot 0. If the global hot spare is replaced, run maintenance by
using the --make_standby command to make the drive
a global hot spare. Contact Dell Technical Support for this
action.
Known Issues and Their Resolutions
The following table lists known issues and the related resolutions for this DR Series system release.
ID Issue Resolution
22168 RDCIFS was listed as supported on
Windows 2003 in the
Dell DR Series
System Interoperability Guide , but this is
inaccurate. Windows 2003 does not
support the command set required to
support RDCIFS.
Updated the Dell DR Series System
Interoperability Guide for 3.1.2 to reflect
the correct support of RDCIFS.
22145 RDS OpDup was failing across the
firewall as the TCP connection timed out
during extended idle times. In this
release, we have added keep alive on the
RDS OpDup path connection. Corrected in version 3.1.2.
21748 DR2000v FS was failing during boot on
some legacy Intel and AMD processors. Corrected in version 3.1.2.
20766 DR Series deployment using a static IP
may come up in maintenance mode
during initial boot as default IP is not
being assigned. Corrected in version 3.1.2.
Resolutions For Earlier Releases
The following table lists known issues, descriptions, and related solutions or workarounds for the DR Series system 3.1
release and earlier releases.
ID Issue Description Workaround/Solution
21893 Bash Security Fix -
BASH Remote Code
Execution Vulnerability
(ShellShock). Corrected in version 3.1.1.
21873 During an upgrade from
2.x to 3.x under some
unusual corner cases,
the latest configuration Corrected in version 3.1.1.
11