Dell PowerVault DR2000v - Manual (Page 23)

ID Issue Description Workaround/Solution
became inaccessible
due to the DR Series
system leaving the
domain.
18215 If you created a CIFS
user named root or
service, you could not
delete it. Corrected in the 3.0.0.1 release.
18151, 17997, 14534 Addition of additional
DMA markers and
changes to marker
code for the DMAs that
need marker detection.
The BridgeHead,
Networker and
Unix_Dump markers
must be set explicitly
on a container and
are not part of the
Auto marker option.
Corrected in the 3.0.0.1 release. The Auto
setting (default) will recognize markers for the
2.X supported DMACommVault|TSM|
ARCserve|HP_DataProtector.
Newer Markers must be explicitly set using
the appropriate selection BridgeHead,
Networker or Unix_Dump.
18070 The command -system
– -- show --hardware |
grep -i NIC does not list
1 Gb NICs if you have 10
Gb in the system. Corrected in the 3.0.0.1 release.
18001 The - .bashrc is missing
rda from the complete -
F line. Corrected in the 3.0.0.1 release.
17999 During a system
upgrade, the software
upgrade stopped
because it exited the
CLI shell. A message has been added instructing you to
not interrupt the upgrade process.
17863 After upgrading your
system, you are
prompted to reboot. The
GUI will indicate that
the reboot takes up to
10 minutes, which is the
best case scenario. It
can actually take up to
30 minutes, during
which time your user
interface can appear
frozen. Corrected in the 3.0.0.1 release.
17796 When the total number
of Domain Controllers is
very large, issues can
occur when you try to
add the machine to the
domain. Corrected in the 3.0.0.1 release.
23