Dell PowerEdge R510 - Manual (Page 30)

30
About Your System
E1114 Ambient Temp
exceeds
allowed range.
Ambient temperature has
a reached a point outside
of the allowed range. See "Troubleshooting
System Cooling
Problems" on page 176.
E1116 Memory
disabled,
temp above
range.
Power
cycle AC.
Memory has exceeded
allowable temperature and
has been disabled to
prevent damage to the
components. Remove AC power to the
system for 10 seconds and
restart the system.
See "Troubleshooting
System Cooling
Problems" on page 176.
If the problem persists,
see "Getting Help" on
page 199.
E1210 Motherboard
battery
failure.
Check
battery.
CMOS battery is missing
or the voltage is outside of
the allowable range. See "Troubleshooting the
System Battery" on
page 174.
E1211 RAID
Controller
battery
failure.
Check
battery.
RAID battery is either
missing, bad, or unable
to recharge due
to thermal issues. Reseat the RAID battery
connector. See "Installing
the RAID Battery" on
page 147, and
"Troubleshooting System
Cooling Problems" on
page 176.
E1216 3.3V Regulator
failure.
Reseat PCIe
cards.
3.3 V voltage regulator
has failed. Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 184.
E1229 CPU # VCORE
Regulator
failure.
Reseat CPU.
Specified processor
VCORE voltage
regulator has failed. Reseat the processor(s).
See "Troubleshooting
Processors" on page 186.
If the problem persists,
see "Getting Help" on
page 199.
Code Text Causes Corrective Actions
book.book Page 30 Friday, November 20, 2009 2:56 PM