Dell PowerEdge C5230 - Manual (Page 53)

51
SSL
The Secure Socket Layer protocol was created by Netscape to ensure secure
transactions between web servers and browsers. The protocol uses a third
party, a Certificate Authority (CA), to identify one end or both end of the
transactions.
Using MegaRAC GUI, configure SSL certificate into the BMC. Using this,
the device can be accessed in a secured mode.
To open SSL Certificate Configuration page, click Configuration > SSL
from the main menu. There are three tabs in this page.
• Upload SSL option is used to upload the certificate and private key file
into the BMC.
• After uploaded, tab function [
View SSL] will show the
information of PEM file uploaded.
• Generate SSL option is used to generate the SSL certificate based on
configuration details.
• After running [
Generate SSL] successfully, [View SSL] will show the
information of SSL generated.
• View SSL option is used to view the SSL certificate in readable format.
NOTE: The way to use command lines below will generate certificate.pem and
key.pem.
1. openssl genrsa -out key.pem 1024
2. openssl req -new -key key.pem -out request.pem
3. openssl x509 -req -days 30 -in request.pem -signkey key.pem -out certificate.pem
more detail please refer to this link:
http://panoptic.com/wiki/aolserver/How_to_generate_self-
signed_SSL_certificates