Dell PowerEdge C5230 - Manual (Page 19)

17
Network Information
The Network Information of the device with the following fields is shown
here. To edit the network Information, click Edit.
Remote Control
Start remote redirection of the host by launching the console from this page.
Sensor Monitoring
It lists all the available sensors on the device with the following information’s.
The status column displays the state of the device. There are four states
describe in Table 1-9.
If you click the icon, the sensor page for that particular sensor will be
displayed.
Table 1-8. Network Information Description
Item Description
MAC Address Read only field showing the IP address of the device.
V4 Network Mode The v4 network mode of the device which could be
either disable, static or DHCP.
IPv4 Address The IPv4 address of the device (could be static or
DHCP).
V6 Network Mode The v6 network mode of the device which could be
either disable, static or DHCP.
IPv6 Address: The IPv6 address of the device.
Table 1-9. Sensor Status Description
Status Description
Denotes normal state
Denotes Not Available State
Denotes Warning State
Denotes Critical State