Dell PowerEdge C5230 - Manual (Page 46)

44
4 In the Filter Action configuration section,
• Event Filter Action is a mandatory field and checked by default, which
enable PEF Alert action (read-only).
• Select any one of the Power action either Power down, Power reset or
Power cycle from the drop down list
• Choose any one of the configured alert policy number from the drop
down list.
NOTE: Alert Policy has to be configured - under Configuration->PEF->Alert Policy.
5 In the Sensor configuration section,
• Select the type of sensor that will trigger the event filter action.
• In the sensor name field, choose the particular sensor from the sensor
list.
• Choose event option to be either All Events or Sensor Specific Events.
6 Click Modify to accept the modification and return to Event filter list.
7 Click Reset to reset the modification done.
8 Click Cancel to cancel the modification and return to Event filter list.
9 In the Event filter list, click Modify to modify the existing filter.
10 In the Event filter list, click Delete to delete the existing filter.