Front panel user interface, Power button, Leds – Dell PowerEdge C5230 User Manual

Page 15

Front Panel User Interface

The BMC provides control panel interface functionality including indicators

(fault, status, and ID LEDs) and buttons (power/ID).

Power Button

The power button turns the device on and off.

LEDs

BMC Heartbeat LED

The green LED provides an easy way to indicate that BMC is now enabled.

ID LED

A blinking LED indicates the Chassis Identify command has been accepted.

System Status LED

There is a dual-color LED to show the system status. The BMC turns the

LED off after all event logs are cleared.
The behavior of Status LED and ID LED is listed in Table 1-5.

Table 1-5. LED Status

LED

Color Status

Occurrence

Note

Status LED Amber Blinking See "Blinking Fault

Off

Normal status

Power LED Green Solid On Power On

The power LED status is

controlled by BIOS.

Off

Power Off