Dell PowerEdge C5230 User Manual
Page 41
39
5 In the Network Privilege field, enter the network privilege assigned to the
user which could be Administrator, Operator, User or No Access. Please
refer to table below for detailed information.
6 Check the SNMP Status check box to enable SNMP access for the user.
NOTE:
Password field is mandatory, if SNMP Status is enabled.
7 Choose the SNMP Access level option for user from the SNMP Access
dropdown list. Either it can be Read Only or Read Write.
8 Choose the Authentication Protocol to use for SNMP settings from the
drop down list.
NOTE:
Password field is mandatory, if Authentication protocol is changed.
9 Choose the Encryption algorithm to use for SNMP settings from the
Privacy protocol dropdown list.
Table 1-20. User Privilege Association between IPMI and Web GUI
Web GUI Privilege List
Privilege association between IPMI and Web GUI
Administrator
Operator
User
login BMC from Web GUI,
SSH and Telnet
O
O
X
configure BMC from Web
GUI
O
O
X
configure users from Web
GUI
O
X
X
clear logs from Web GUI
O
X
X
execute server power control
from Web GUI
O
O
X
virtual KVM redirection
O
O
X
virtual media
O
O
X