Dell PowerEdge C5230 - Manual (Page 32)

30
Procedure:
1 Choose either of the following as your requirement:
• Set mode to Absolute
• Set mode to Relative radio
2 Click Save button to save the changes made.
3 Click Reset to reset the modified changes.
Network
In MegaRAC GUI, the Network Settings Page is used to configure the
network settings for the available LAN channels. To open Network Settings
page, click Configuration > Network from the main menu. A sample
screenshot of Network Settings Page is shown in the screenshot below.
The fields of Network Settings page are explained below.
Table 1-16. Network Settings
Item Description
LAN Interface Lists the LAN interfaces.
LAN Settings To enable or disable the LAN Settings.
MAC Address This field displays the MAC Address of the device.
This is a read only field.
IPv4 Settings This option lists the IPv4 configuration settings.