Control panel assembly, Removing the control panel – Dell PowerVault DX6104 User Manual

Page 76

Control Panel Assembly

Removing The Control Panel

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.

If installed, remove the front bezel.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and

peripherals.

Open the system.

CAUTION: Do not use excessive force when removing the control panel as it can damage the connectors.

Release the locking tabs of the control panel by angling the control panel up and away from the system.

Figure 35. Removing and Installing the Control Panel

1. notches (6)
2. locking tabs (6)
3. control panel