Dell PowerEdge M910 - Manual (Page 13)

About Your System 13
1
About Your System
Accessing System Features During Start-up
Keystroke Description
Enters the System Setup program. See "Using the System Setup
Program and UEFI Boot Manager" on page 137.
Enters System Services, which opens the Dell Unified Server
Configurator (USC). The Dell USC allows you to access utilities such
as embedded system diagnostics. For more information, see the
Unified Server Configurator documentation.
NOTE: Unified Server Configurator is supported on PowerEdge M610,
M610x, M710, M710HD, M910, and M915.
Boot Mode set to BIOS: Enters the BIOS Boot Manager, which allows
you to select a boot device.
Boot Mode set to UEFI: Enters the UEFI Boot Manager, which
enables you to manage your system’s boot options.
Enters PXE boot (if enabled in System Setup program).
Enters the remote access utility, which allows access to the system
event log (SEL) and configuration of remote access to the system.
Enters the SAS Configuration Utility. See your SAS adapter
documentation for more information.
Enters the RAID configuration utility. For more information, see the
documentation for your RAID card.
Enters the utility to configure NIC settings for PXE boot. For more
information, see the documentation for your integrated NIC.