Dell PowerEdge M910 User Manual
Page 116
116
About Your System
Warning: PCIe
expansion riser
not found. Check
mezzanine
interface card and
cables.
This warning occurs if
BIOS does not discover
the expansion-card riser
during POST. BIOS
continues with POST after
displaying this warning to
the console.
NOTE:
Applicable to M610x
only.
Ensure that the expansion-
card riser is installed in the
system, If applicable,
reinstall the expansion-card
riser and check all cable
connections. See
on page 239.
If the problem persists, the
expansion-card riser may be
faulty. See "Getting Help" on
Error: Unsupported
mezzanine card
configuration.
This error occurs if the
type and configuration of
mezzanine cards installed
are not supported.
Ensure that the mezzanine
cards installed are supported
by the blade. See "I/O
Verifying blade
power...
Status message that BIOS
is waiting for
iDRAC/CMC to grant
power to the blade before
proceeding with POST.
Information only.
Cannot Power ON.
Cables are not
installed properly
or Mezz IFC FRU is
corrupted
The cables in expansion
are not installed properly
or Mezz IFC FRU is
corrupted.
NOTE:
Applicable to M610x
only.
Ensure that PCIe expansion
cables are connected
properly. If required, reseat
the Mezz IFC FRU. If the
problem persists, see
Expansion Cables
are not installed
properly
PCIe expansion cables not
installed properly.
NOTE:
Applicable to M610x
only.
Ensure that PCIe expansion
cables are connected
properly.
Table 1-27. Blade Messages
(continued)
Message
Causes
Corrective Actions