Dell Vostro 500 (Mid 2009) - Manual (Page 117)

Adding and Replacing Parts
117
NOTICE:
To prevent damage to the memory module connector, do not use tools to
spread the memory module securing clips.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
3 Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
4 Remove the module from the connector.
1 cover 2 captive screws (8)
2
1
book.book Page 117 Thursday, August 7, 2008 5:00 PM