beautypg.com

Cabletron Systems SEH-22 User Manual

Page 37

background image

CONNECTING THE SEH TO THE NETWORK

SEH USER’S GUIDE

4-7

3. If the Internal Termination switch is in the OFF position:

a.

Attach a BNC tee-connector to the BNC port on the module.

b. Attach the thin-net segment to one of the female connectors on the

tee-connector.

c.

Attach another thin-coax segment or a terminator to the other
female connector on the tee-connector.

Figure 4-4. The EPIM-C

Terminate each segment attached to the tee-connector. If a
segment is not attached to one of the female connections on
the tee-connector, place a terminator on that connection.

NOTE

See also other documents in the category Cabletron Systems Computer Accessories: