Cabletron Systems SEH-22 - Manual (Page 23)

INSTALLING THE SEH
SEH USER’S GUIDE 3-3
If the installation requires that the SEH be stacked, proceed to Section
3.2.5. Otherwise, continue by powering-up the SEH as described in
Section 3.3.
3.2.2 Rackmount Installation Requirements
To install the SEH in a 19-inch rack, Cabletron Systems offers an
accessory kit that includes rack mount brackets, mounting screws, and a
strain-relief bracket for cable management. The accessory kit is not
included with the SEH, but is purchased separately from Cabletron
Systems as part number SEH-ACCY-KIT.
Rack mounting the SEH involves:
• Attaching the strain relief bracket
• Attaching the rackmount brackets
• Installing the SEH in a 19-inch rack
• Interconnecting SEH units when applicable
Tools Required
• Phillips Screwdriver
Materials Required
The following parts are included in the SEH-ACCY-KIT accessory kit.
Use Figure 3-2 to determine the correct brackets to use for this
application.
• Strain relief bracket