Cisco 2940 - Manual (Page 80)

Index
IN-4
Catalyst 2940 Switch Hardware Installation Guide
OL-6157-01
P
package contents 3-3 to 3-4
patch cables, MT-RJ 2-4
PC, connecting to switch B-8
performance problems, solving 4-4
physical dimensions A-1
pinouts
10/100/1000 ports B-3
10/100 ports B-2
adapters
DB-25 B-9
console port
DB-25 adapter B-9
RJ-45-to-DB-9 adapter cable B-8
crossover cables
four twisted-pair, 10/100 ports B-6
four twisted-pair, 1000BASE-T ports B-7
two twisted-pair B-5
RJ-45-to-DB-25 terminal adapter B-9
RJ-45-to-DB-9 adapter cable B-8
RJ-45-to-DB-9 PC adapter cable B-8
straight-through cables
four twisted-pair, 10/100 ports B-6
four twisted-pair, 1000BASE-T ports B-7
two twisted-pair B-5
port mode LEDs 2-7 to 2-8
port numbering 2-3
ports
See 10/100 ports, 10/100/1000 ports, 100BASE-FX
ports, and console ports
POST
problems, solving 4-5
verifying switch operation 3-4
power
requirements A-1
power connector 2-9
procedures
IP address 3-17
product disposal warning 3-2
publications, related xiii
R
rear panel
clearance 3-3
console port connector 2-10
described 2-9
illustrated 2-9
power connector 2-9
related publications xiii
rollover cable B-9
S
safety agency approvals A-2
safety warnings 3-1 to 3-2
security slot 2-10
SFP modules
cabling recommendations 2-5
connecting to 3-12 to 3-13, 3-16 to 3-17
described 2-5
SFP module slot
numbering 2-3
slot numbering 2-3
SNMP network management platforms 2-11
software switch management 2-11
specifications A-1 to A-2
speed LED 2-7, 2-8
stacking the chassis warning 3-2
status LED 2-7, 2-8
straight-through cable
connecting to
10/100/1000 ports 3-14
10/100 ports 3-14