Canon 650D - Manual (Page 92)

92
i : Changing the ISO SpeedN
*1: Fixed at ISO 400 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: Except in the A, 6, and F modes.
*5: Automatically set within ISO 400 - 1600 (or up to the maximum limit) in the C,
2 , 3, 4, 5 and modes if you use bounce flash with an external
Speedlite.
For ISO Auto, you can set the maximum ISO speed limit within ISO 400
- 6400.
Under the [z3] tab, select [ISO Auto],
then press <0>. Select the ISO speed,
then press <0>.
Shooting Mode ISO Speed Setting
A / 7 / C / 3 / 4 / 5 / 6 / G Automatically set within ISO 100 - 6400
2 ISO 100
F Automatically set within ISO 100 - 12800
d / s / f / a
* 1 Automatically set within ISO 100 - 6400* 2
With flash ISO 400* 3 * 4 * 5
3 Setting the Maximum ISO Speed for [ISO Auto]N
When [AUTO] is set, the ISO speed is indicated in whole-stop
increments. However, the ISO speed is actually set in finer increments.
Therefore, in the image’s shooting information (p.266), you may find an
ISO speed such as 125 or 640 displayed as the ISO speed.
In the <2> mode, the ISO speed shown in the table is actually used
even if ISO 100 is not displayed. COP
Y