Canon 650D - Manual (Page 37)

37
3 Setting the Date, Time, and Time Zone
3
Set the date and time.
Press the key to select the
date or time number.
Press <0> so is displayed.
Press the key to set the
number, then press <0>. (Returns
to .)
4
Set the daylight saving time.
Set it if necessary.
Press the key to select [Y].
Press <0> so is displayed.
Press the key to select [Z],
then press <0>.
When the daylight saving time is set
to [Z], the time set in step 3 will
advance by 1 hour. If [Y] is set, the
daylight saving time will be canceled
and the time will go back by 1 hour.
5
Exit the setting.
Press the key to select [OK],
then press <0>.
X The date/time and daylight saving
time will be set and the menu will
reappear.
If you store the camera without the battery or if the camera’s battery
becomes exhausted, the time zone and date/time may be reset. If this
happens, set the time zone and date/time again.
The date/time that was set will start from when you press <0> in step 5.
After changing the time zone, check that the correct date/time has been set.
You can also set the daylight saving time with [52: Time zone].
The [52: Time zone] and [52: Date/Time] daylight saving time settings
are linked.
COP
Y