Canon 650D - Manual (Page 79)

79
In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot
while the settings match the lighting or scene type. Normally,
[
Default setting] is adequate, but if the settings match the lighting
condition or scene, the picture will look more accurate to your eye.
For Live View shooting, if you set both [Light/scene-based shots] and
[Ambience-based shots] (p.76), you should first set [Light/scene-
based shots]. This will make it easier to see the resulting effect on the
LCD monitor.
1
Set the Mode Dial to any of the
following modes: <2>, <3>,
<4> or <5>.
2
Display the Live View image.
With the Live View image displayed,
you can see the resulting effect.
Press the button to switch to
Live View shooting.
Shoot by Lighting or Scene Type
Lighting or Scene 2 3 4 5
Default setting k k k k
Daylight k k k k
Shade k k k k
Cloudy k k k k
Tungsten light k k k
Fluorescent light k k k
Sunset k k k k
COP
Y