Dell POWEREDGE 1955 - Manual (Page 50)

48
Configuring the KVM Switch Module
Using the RACADM Command Line Interface to Update the KVM Firmware
NOTE:
You can download a TFTP server from http://solarwinds.net. For information on installing
and configuring the SolarWinds TFTP server, refer to the SolarWinds website.
1 Copy the KVM firmware binary file to a TFTP server root directory.
2 Log on to the DRAC/MC Telnet or serial interface.
See "Serial or Telnet Console Interface" on page 14
3 Enter the racadm fwupdate command, as in the following example:
racadm fwupdate -a -d -m
kvm
4 The TFTP download and firmware update process may take several minutes. After the update
completes, the KVM resets.