Canon S80 User Manual

Page 79

Advanced Shoo

ting Functions

Switching between Built-in Flash Adjustment Settings

The built-in flash fires with automatic flash adjustments (except in the

mode), but it is possible to set it so that it fires without any adjustments.

Select [Flash Adjust] from the
[

(Rec.)] menu.

See Selecting Menus and Settings (Basic
Guide: p. 16).

Use the or button to select [Auto] or [Manual] and
press the MENU button.

Settings can be made by turning the multi control dial.

Setting the Flash Adjustment/Flash Output

Mode Dial

*1 When [Flash Adjust] is set to [Manual], flash output settings can be made.

*2 Only [Flash output] can be set.

Flash Exposure

Compensation

When [Flash Adjust] is set to [Auto], settings can be adjusted in 1/3-stop
increments in the range of -2 EV to +2 EV.

You can enjoy flash photography with exposure adjustments with the
combined use of the camera's exposure compensation function.

Flash Output

mode or when [Flash Adjust] is set to [Manual], the flash output

can be controlled in three steps, up to FULL, when shooting.

05_EC176CUG_Chap4_E.fm Page 77 Tuesday, June 28, 2005 2:18 PM