Using the self-timer – Canon S80 User Manual
Page 38

36
2
Use the or button to select [On] and press the
MENU button.
Settings can be made by turning the multi control dial.
Using the Self-timer
1
Press
button.
The current setting is displayed.
z
Pressing the button cycles between
settings.
z
You can switch between the
(10 sec.),
(2 sec.) and
(Custom
Timer) options with the [Self timer] option in the [
(Rec.)] menu
(p. 27).
z
When the self-timer is set to
, the shutter activates 10 seconds after,
and when the self-timer is set to
, the shutter activates 2 seconds
after, the shutter button is pressed fully. With the
option, the specified
number of shots are taken after the specified delay.
* May not be displayed, depending on mode.
When shooting with a high ISO speed and using the built-in flash,
there is more of a chance of overexposure the closer you are to the
subject.
The fastest shutter speed for flash synchronization is 1/250 second.
The camera automatically resets the shutter speed to 1/250 second if
a faster speed is selected.
When shooting with [Slow Synchro] set to [On], camera shake may
become a factor. Use of a tripod is recommended.
In the case of My Colors,
,
,
, and
, the flash mode
setting is not canceled even when the camera is turned off.
Mode Dial
*
EC176CUG_E.book Page 36 Tuesday, June 28, 2005 12:40 PM