Compaq EP Series - Manual (Page 87)

4-44 Removal and Replacement Procedures
5. Lift the battery out of the holder.
Removing the Battery
6. Slide the replacement battery into position with the positive side up. The battery holder
automatically secures the battery in the proper position.
7. If you removed expansion boards, reinstall them now.
8. Replace the computer access panel.
9. Reassemble the computer.
10. Reconnect the AC power cord and turn on the computer.
11. Reset the date and time, your passwords, and any special system setups, using Compaq
Computer Setup.
WARNING: This computer contains a lithium-ion battery pack. There is a risk of fire and chemical
burn if the battery pack is handled improperly. Do not disassemble, crush, puncture, short external
contacts, dispose in water or fire, or expose it to temperatures higher than 60ºC (140ºF).
In North America, dispose of nickel metal hydride or lithium-ion batteries by taking advantage of the
Compaq battery recycling program. You will be provided with a postage-paid battery pack mailer
preaddressed to a reclamation facility where the metals are recycled. Call the telephone number
listed for your location in the Contacting Customer Support guide for more information.
In Europe, do not dispose of batteries with general household waste. Dispose of or recycle them by
using the public collection system or returning them to Compaq, your authorized Compaq partners,
or their agents.