About this guide, Symbols and conventions, Technician notes – Compaq EP Series User Manual
Page 7: Preface, Bout, Uide
Compaq Deskpro EP Series of Personal Computers
vii
preface
A
BOUT
T
HIS
G
UIDE
This Maintenance & Service Guide is a troubleshooting and repair guide that can be used
for reference when servicing the Compaq Deskpro EP Series of Personal Computers. Only
authorized technicians trained by Compaq should attempt to repair this equipment.
Compaq Computer Corporation reserves the right to make changes to these models
without notice.
Symbols and Conventions
The following text and symbols mark special messages throughout this guide:
!
WARNING: Text set off in this manner indicates that failure to follow directions in the warning
could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of data.
✎
Text set off in this manner presents commentary, sidelights, clarifying
information, or specific instructions.
Technician Notes
!
WARNING: Only authorized technicians trained by Compaq should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard. Any
indications of component replacement or printed wiring board modifications may void any
warranty.
!
WARNING: To reduce the risk of electric shock or damage to the equipment:
• Do not disable the power grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect the power from the computer by unplugging the power cord either from the electrical
outlet or the computer.
CAUTION: The computer is designed to be electrically grounded. To ensure proper operation, plug
the AC power cord into a properly grounded AC outlet only.