Compaq EP Series - Manual (Page 44)

Compaq Deskpro EP Series of Personal Computers 4-1
chapter 4
R
EMOVAL AND
R
EPLACEMENT
P
ROCEDURES
This chapter provides general service information for the computer. Adherence to the
procedures and precautions described in this chapter is essential for proper service.
After completing all necessary removal and replacement procedures, run the Diagnostics
utility to verify that all components operate properly.
4.1 Disassembly Sequence Chart
Use the chart below to determine the disassembly sequence for removing components
from the computer.
4.3 Computer Feet
4.4 Logo Plate
4.5 Cable Lock
4.6 Access Panel
4.7
Front Bezel
4.8
Power Button
4.9Subpanel and Bezel Blanks
4.10
Power Switch
4.11.1 Removing an Internal 3.5-Inch Hard Drive
4.11.2 Removing an External 5.25-Inch Drive
4.11.3 Removing an External 3.5-Inch Drive
4.12 Removing the Drivelocks
4.13.3 Removing an Expansion Board
4.14 Board Guide
4.15 System Memory
4.16.1 AGP Graphics Board Removal
4.16.2 AGP Graphics Memory Upgrade
4.17.1 Processor
4.17.2 Processor Guide Rails
4.18
System Board
4.19Internal Speaker
4.20
Lithium Battery
4.21 Fan Assembly
4.22 Power Supply
4.23 Converting a Desktop to a Minitower
4.24 Converting a Minitower to a Desktop