19 internal speaker, 19internal speaker – Compaq EP Series User Manual

Page 83

Text mode
Original mode

4-40

Removal and Replacement Procedures

4.19

Internal Speaker

1. Prepare the computer for disassembly (Section 4.2).

WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.

2. Lay the computer down on its large base for greater stability.
3. Remove the access panel (Section 4.6).

4. Disconnect the speaker cable from the audio board

5. If a round speaker is used on the computer, remove the two screws

2 that secure the

speaker

3 to the side of the drive cage.

Removing the Speaker From the Side of the Drive Cage