Baumer GK473 User Manual
Page 8
Manual_GK473_CANopen_EN.doc
8/24
Baumer IVO GmbH & Co. KG
04.05.11
Villingen-Schwenningen,
Germany
4.3.4. Activation of CANopen terminating resistor
If GK473 CANopen is the final device in the CAN-Bus bus line it must be terminated by a resistor.
The terminating resistor is activated by setting the one-pole DIP to “ON”. Default is “OFF”.
ON
1
ON = final user
OFF = user X
4.3.5.
Gateway projecting in the CANopen project
For gateway projecting in CANopen project please refer to the attached EDS file.
GK473_CANopen.eds
See also other documents in the category Baumer Sensors:
- UNAR 18U6912/S14G (2 pages)
- UZAM 70P8131/S14C (3 pages)
- UZDK 30P6113 (2 pages)
- O500.GR-GW1T.72CU (4 pages)
- URAM 50N1721 (2 pages)
- FVDK 22P6101/S14C (2 pages)
- FZAM 30P5004 (2 pages)
- OZDK 10P5150/S35A (2 pages)
- FPDK 20N5101/S35A (2 pages)
- UNDK 20N6903/S35A (2 pages)
- UZAM 50N6121/S14 (2 pages)
- IFBR 17N17T1/S14L-9 (2 pages)
- OPDM 16P5102 (2 pages)
- OPDK 14P5901/S14 (2 pages)
- OEDK 14P5101/S35A (2 pages)
- OBDM 12N6910/S35A (4 pages)
- MTRM 16G2524/M300 (2 pages)
- UR18.DA0-UA1B.7BO (4 pages)
- GK473 (31 pages)
- GK473 (16 pages)
- GK473 (32 pages)
- UNDK 30N1713/S14 (2 pages)
- FKDM 22P1911/S14F (4 pages)
- UNDK 09G8914/D1 (3 pages)
- Speed switches DSL (22 pages)
- OADM 20U2480/S14C (4 pages)
- FZCK 07N6901 (2 pages)
- FVDK 12P6410/S35A (2 pages)
- G1-G2-G0-GE-GB-GXxxx (18 pages)
- G1-G2-G0-GE-GB-GXxxx (52 pages)
- G1-G2-G0-GE-GB-GXxxx (26 pages)
- URDK 10N8914 (2 pages)
- OPDK 14P3902/S35A (2 pages)
- UNAM 30U9103/S14 (2 pages)
- PA203 (30 pages)
- O300.RP-PV1T.72N (4 pages)
- BMxx, GBxxx-GXxxx - EtherCAT / PoE from version ,5.0 (30 pages)
- OADM 12U6430/S35A (4 pages)
- OADM 13U7580/S35A (4 pages)
- O500.RP-NV1T.72CU (4 pages)
- FHDK 14N6901/S35A (2 pages)
- O500.RP-PV1T.72CU (4 pages)
- OZDK 10P5150 (2 pages)
- G1-G2-GB-GXxxx (40 pages)