Baumer CleverLevel - LFFS - Manual (Page 4)

Refer to data sheet ”Accessories Universal” for further
information
NOTE:
The LFFS must be mounted in a Baumer mounting
connection. If not, Baumer do not guarantee correct
function or tightness.
Operators instructions
CleverLevel switch, LFFS
Mounting connections
ISO2852 SMS 1145 Welding
DN38: CAM023.505 DN51: SAM020.051.1 for tank
DN51: CAM023.640 PM023
Variline, type N
DIN 11851 Welding
VAM023 DN25: MAM020.025 for tank
DN40: MAM020.040 PM021
DN50: MAM020.050
Adapter Welding
G½ → G1 to pipe end
RAM020.1 DN25...50: PM022.1
DN65...100: PM022.2
Adapter Welding Ø35
1” level switch for tank/tube
LAM020.3 PM025
Adapter, industrial
G½ → G1
RAM020.2
Welding
for tank
8126916
Welding
for pipe end
8126928
www.baumer.com Operators instructions: 11109132 02 EN Page 4 / 12
On a welding adapter there is an
arrow or a 3A logo.
This must be placed upwards when
welding the adapter into a tank
(horizontal position).
This assures that the electrical con-
nection will be pointing downwards
(opposite of the arrow; 3A logo)