Baumer CleverLevel - LFFS - Manual (Page 3)

Installation of 3A approved and EHEDG certified products:
1) Use only a 3A approved counter part.
2) The inspection hole should be visible and drained.
3) Mount the instrument in a self drained position.
4) Level the inner surface of the pipe with the counter part.
5) Welding's should be grinded to Ra= 0.8
Operators instructions
CleverLevel switch, LFFS
Example
with 8126-928



Example
with PM023
Example
with 8126-916

Leakage indication hole
must be places downwards
Fitted
incorrect
Cannot be
drained
WARNING
After installation and configuration
 Check the leak tightness of the sleeve.
 Check the tightness of glands or M12 plugs.
 Check the tightness of the cover
Mounting
Tighten the union with a torque of:
Std. version 20...25 Nm.
Sliding connection 25...30 Nm.
www.baumer.com Operators instructions: 11109132 02 EN Page 3 / 12