Baumer NE216 - Manual (Page 7)

NE216
www.baumer.com 7
9. Programming plan
Line 11-17 Status lines 1-7
0
Parameter enabled for programming
1 Delete resp. Input lock
2 Skip parameter
Line 21 Operating mode
0 Adding (reset to SC)
1 Subtracting (reset to P2)
2 Subtracting; but output contact at SC, auto-
matic reset at 0
Line 22 Preset mode
0 Step preset
1 P1-trailing preset
Line 23 Reset
0 With automatic reset
1 w/o automatic reset
Line 24 Decimal point in PC, P1, P2, tot, SC
0 None
1 0000.0
2 000.00
3 00.000
Line 30 Count mode
0 Track A UP/DOWN signal at B where required
1 Subtracting (A-B)
2 Adding (A+B)
3 Track A 90° B Single evaluation
4 Track A 90° B Double evaluation
5 Track A 90° B Quadruple evaluation
6 Hour counter with preset
7 Same as 6 but with start and stop
Line 31 Frequency track A
0 10 kHz
1 25 Hz
2 3 Hz
Line 32 Frequency track B
0 10 kHz
1 25 Hz
2 3 Hz
Line 33 Input logic
0 PNP Trigger threshold 6 V
1 NPN Trigger threshold 6 V
2 PNP Trigger threshold 3 V
3 NPN Trigger threshold 3 V
Line 34 Functionality control input 1 (terminal 9)
0 Reset static
1 Reset edge-triggered
2 Reset totalizer edge-triggered
3 Stop
4 Hold
5 Programming lock
6 Key lock
7 Print
8 Outputs IN (P1,P2)
9 Outputs IN (P1,P2) and reset fl.
Line 35 Reaction time of control input 1
0 30 ms
1 100 µs
Line 36 Functionality control input 2 (terminal 10)
0 Reset static
1 Reset edge-triggered
2 Reset totalizer edge-active
3 Stop
4 Hold
5 Programming lock
6 Key lock
7 Print
8 Outputs OUT (P1,P2)
Line 38 Adoption of presets P1,P2,SC
0 Immediately effective
1 Upon reset
Line 40 Output logic of digital outputs
0 Both outputs normally closed
1 P1 normally open, P2 normally closed
2 P1 normally closed, P2 normally open
3 Both outputs normally open
Line 41 Output time P1
0.25 Default
0.01 Min.
99.99 Max.
Line 42 Output time P2
0.25 Default
0.01 Min.
99.99 Max.
Line 43 Time range hour counter
0 999s 99/100s
1 99min 59s 9/10s
2 999min 59s
3 999h 59min
Line 44 Rapid preset recognition
0 Standard
1 Rapid
Line 50 Code
0000 Code not active
:
9999
Line 51 Baud rate
0 4800 Baud
1 2400 Baud
2 1200 Baud
3 600 Baud
Line 52 Parity
0 Even Parity
1 Odd Parity
2 No Parity
Line 53 Stop bits
0 1 Stop bit
1 2 Stop bits
Line 54 Identifier
00 Default
00 Min.
99 Max.