Jeppesen Marine Workboat Navigator 1.3 - Manual (Page 26)

22
Jeppesen Workboat Navigator Installer’s Guide
2
-
Installation
2
-
Installation
NMEA Sentences
Jeppesen Marine products support devices that conform to the National Marine
Electronics Association (NMEA) 0813 standard.
The following tables contain NMEA data sentences supported by Jeppesen
Workboat Navigator:
aRpa/maRpa nmea SentenCeS
nmea nmea S
entenCe
D
efinition
TLL Target Latitude and Longitude
TTM Tracked Target Message
Table 2.2 - ARPA and MARPA Information
GPS/DGPS NMEA SENTENCES
nmea nmea S
entenCe
D
efinition
GGA Global Positioning System Fix Data
GLA LORAN-C Past Position and Time
GLF LORAN-C Predicted or Estimated Waypoint Positions and
Times
GLL Geographic Position - Latitude/Longitude
GLP LORAN-C Present Position and Time
GXF TRANSIT Predicted or Estimated Waypoint Positions and Times
GXP TRANSIT Present Position and Time
RMA Recommended Minimum Specific LORAN-C Data
RMC Recommended Minimum Specific GPS/TRANSIT Data
VTG Course Over Ground and Ground Speed
Table 2.3 - GPS/DGPS Positioning and Tracking Information
HEADING SENSOR NMEA SENTENCES
nmea nmea S
entenCe
D
efinition
HCC Compass Heading
HCD Heading and Deviation
HDG Heading, Deviation, and Variation
HDT True Heading
HDM Magnetic Heading (no longer standard)
HVD Magnetic Variation, Automatic
HVM Magnetic Variation, Manually Set
ROT Rate of Turn
TXT Text (not standard)
Table 2.4 - Heading Information