Jeppesen Mobile FliteDeck for iPad - Manual (Page 58)

Toolbar Common Tasks
Mobile FliteDeck Toolbar
October 2014 Jeppesen Mobile FliteDeck User Guide
Copyright © 2014 Jeppesen. All rights reserved.
51
Identify GPS Status
The GPS Status button appears on the Jeppesen Mobile
FliteDeck toolbar when Enable Moving Map or either one of the
two Display Ownship settings in JeppFD global settings is set to
ON.
Tap the GPS Status button to view the current ground speed,
GPS altitude, last position received, and accuracy status.
A badge appears over the GPS Status button if the GPS signal
does not meet the minimum accuracy requirement. The minimum
required GPS accuracy to display ownship position is:
• 200 meters for the enroute map.
• 50 meters for approach charts.
• 17 meters for an airport diagram.
Lock the Display
To lock and unlock the Jeppesen Mobile FliteDeck display, tap
the Display Lock button on the toolbar.
Locking the display prevents you from accidentally panning or
zooming away from the current display.
When the display is locked, the Display Lock button is
highlighted and you cannot access any other FliteDeck button.