Jeppesen Mobile FliteDeck for iPad - Manual (Page 34)

Viewing Enroute Map Information
View High and Low IFR Enroute Themes
October 2014 Jeppesen Mobile FliteDeck User Guide
Copyright © 2014 Jeppesen. All rights reserved.
27
After the route is successfully shared, go to the Aspen MFD
Gateway window and select GPS1. The shared route moves to
the Garmin GPS device. The Aspen Avionics device accepts all
valid route points.
Loading a Route from Aspen Avionics
To share a route that is activated in Aspen Avionics to Jeppesen
Mobile FliteDeck, first ensure that the iPad is connected to the
AspenCG100 Wi-Fi and that Allow Aspen Avionics
Connection in JeppFD global settings is set to ON.
Once a connection has been established:
1. Open the Flight Info drawer.
2. Tap the Aspen button at the top of the drawer.
3. Tap Load Route.
Viewing Enroute Map Information
Jeppesen Mobile FliteDeck helps you increase situational
awareness by viewing your flight with respect to the enroute and
terminal air structures. This section describes available enroute
map information.
View High and Low IFR Enroute Themes
To switch between High IFR and Low IFR enroute themes:
1. Tap the Enroute Theme button.
2. Select your preferred enroute theme.