Jeppesen Mobile FliteDeck for iPad - Manual (Page 14)

Introduction
Global Settings
October 2014 Jeppesen Mobile FliteDeck User Guide
Copyright © 2014 Jeppesen. All rights reserved.
7
Enroute View
These settings control the display of the Enroute view. Both
Enroute View settings are set to ON by default.
• To be able to track your aircraft, recenter the enroute map
over your aircraft location, and view the enroute map in a
track up orientation, ensure that Enable Moving Map is set
to ON.
• To display ownship position on the enroute map, ensure
that Display Ownship on Enroute is set to ON.
NOTE The minimum GPS accuracy requirement to display
ownship on an enroute map is 200 meters.
Centering the map over aircraft location and displaying the
ownship position on the enroute map are both designed to
improve situational awareness during enroute flight. This
function is not to be used as the basis for navigation.