beautypg.com

Capacities and specifications, Capacities and specifications - 5.0l 32v, Ti-vct – FORD 2015 F-150 User Manual

Page 379: Capacities and specifications - 5.0l 32v ti-vct

background image

E142732

An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
the International Lubricant Standardization
and Approval Committee (ILSAC).

Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that may
not be covered by your vehicle warranty.

Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.

Note: Automatic transmissions that require
MERCON LV transmission fluid should only
use MERCON LV transmission fluid. The
use of any other fluid may cause
transmission damage.

CAPACITIES AND SPECIFICATIONS - 5.0L 32V TI-VCT

Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high
pressure. Only qualified personnel should service the air conditioning refrigerant
system. Opening the air conditioning refrigerant system can cause personal injury.

Capacity

Item

7.7 qt (7.3 L)

Engine oil

15.9 qt (15 L)

Engine coolant

Between MIN/MAX on brake fluid reservoir

Brake fluid

3.5 pt (1.7 L)

Front axle fluid (Four-wheel drive)

5.5 pt (2.6 L)

Rear axle fluid

13.1 qt (12.4 L)

Automatic transmission fluid

1

1.5 qt (1.4 L)

Transfer case fluid
Four-wheel drive (Electronic Shift-on-the-
Fly)

376

F-150 (), enUSA, First Printing

Capacities and Specifications