beautypg.com

Cleaning leather seats, Vehicle care – FORD 2015 F-150 User Manual

Page 325

background image

Clean the instrument panel and cluster
lens with a clean, damp, white cotton
cloth, then use a clean and dry white
cotton cloth to dry these areas.

Avoid cleaners or polishes that increase
the gloss of the upper portion of the
instrument panel. The dull finish in this
area helps protect you from
undesirable windshield reflection.

Be certain to wash or wipe your hands
clean if you have been in contact with
certain products such as insect
repellent and suntan lotion in order to
avoid possible damage to the interior
painted surfaces.

Do not use household or glass cleaners
as these may damage the finish of the
instrument panel, interior trim and
cluster lens.

Do not allow air fresheners and hand
sanitizers to spill onto interior surfaces.
If a spill occurs, wipe off immediately.
Damage may not be covered by your
warranty.

If a staining liquid like coffee or juice has
been spilled on the instrument panel or on
interior trim surfaces, clean as follows:

1.

Wipe up spilled liquid using a clean,
white, cotton cloth.

2. Wipe the surface with a damp, clean,

white cotton cloth. For more thorough
cleaning, use a mild soap and water
solution. If the spot cannot be
completely cleaned by this method,
the area may be cleaned using a
commercially available cleaning
product designed for automotive
interiors.

3. If necessary, apply more soap and

water solution or cleaning product to
a clean, white, cotton cloth and press
the cloth onto the soiled area. Allow
this to set at room temperature for 30
minutes.

4. Remove the soaked cloth and if it is not

soiled badly, use this cloth to clean the
area by using a rubbing motion for 60
seconds.

5. Following this, wipe area dry with a

clean, white, cotton cloth.

CLEANING LEATHER SEATS

(If

Equipped)

Without King Ranch Edition

Note: Follow the same procedure as
cleaning leather seats for cleaning leather
instrument panels and leather interior trim
surfaces.

For routine cleaning, wipe the surface with
a soft, damp cloth and a mild soap and
water solution. Dry the area with a clean,
soft cloth.

For cleaning and removing spots and stains
such as dye transfer, use Motorcraft
Premium Leather and Vinyl Cleaner or a
commercially available leather cleaning
product for automotive interiors.

Note: Test any cleaner or stain remover on
an inconspicuous area.

You should:

Remove dust and loose dirt with a
vacuum cleaner.

Clean and treat spills and stains as
soon as possible.

Do not use the following products as these
may damage the leather:

Oil and petroleum or silicone-based
leather conditioners.

Household cleaners.

Alcohol solutions.

Solvents or cleaners intended
specifically for rubber, vinyl and
plastics.

322

F-150 (), enUSA, First Printing

Vehicle Care