Dogtra 2500B Series - Manual (Page 21)

Battery Charging Procedure
Note : The unit has a partial charge when it
leaves the Dogtra facility, upon receipt of
the collar, be sure to give it a full 2-hour
initial charge before the first use.
1. Attach the charging cables to both the
transmitter and receiver(s), as shown on page
2. Plug the charger into a 120-volt wall outlet
or, if using the accessory field charger, plug
into a cigarette lighter only for Lithium-
Polymer battery. (Use a 230-volt European
39
CHARGING THE BATTERIES
Recharge the unit if :
The LED indicator light on the collar
receiver is emitting a red color.
If the 3 bar indicator on the transmitter LCD
shows just 1 bar.
The indicator light on the transmitter or
receiver will not come on.
The indicator light on the transmitter or
receiver comes on momentarily, but will not
stay on when the “Constant” button is
pushed.
38.
uses Lithium-
Polymer batteries.
1. Charge the unit before using the unit for
the first time.
2. Do not charge the batteries near any
flammable substances.
3. Fully charge the batteries if the unit is to
be stored without use for a period of 3
months or more.
CHARGING THE BATTERIES
38
CHARGING THE BATTERIES