Dogtra 2500B Series - Manual (Page 15)

26
DESCRIPTION OF COLLAR / RECEIVER PARTS
Receiver ON/OFF Magnetic Red Dot
To activate the receiver/collar, place the
red dot on the back of the transmitter to the
red dot on the collar/receiver. Hold the two red
dots together for a moment until the LED light
on the receiver/collar comes on.
To deactivate the unit, repeat the same
procedure holding the two red dots together
momentarily. The LED light will turn red for a
brief moment indicating that the
collar/receiver is now shut off.
Receiver Indicator Light (LED window)
Located on the front of the receiver/collar,
the indicator light comes on and blinks once
every 4 seconds after the collar has been turned
on. The color of the LED indicates the battery
life of the receiver.
(Green = full charge, Amber = medium
charge, Red = needs charge)
When the “Constant” button on the
transmitter is pushed, the collar indicator light
will glow steadily (either green, amber, or red
based on the remaining battery life), as long as
you hold the button down, for up to 12 seconds.
When the “Nick” button is pushed, the light
comes on for a fraction of a second.
27
DESCRIPTION OF COLLAR / RECEIVER PARTS