Integra LifeSciences CryoSolutions Cryosurgical Unit - Manual (Page 8)

8
• Remove tip from unit and sterilize following EN norms
13060 and 285 for steam sterilization.
• Other sterilization methods are not recommended.
• Dry heat sterilization may damage tips and is not
recommended.
• Steam sterilize glass tips only. Sterilize at 273° F/134° C for
9 minutes.
Maintenance/Storage
Always protect the Dispensing Tip with the cap provided with the
CryoSolutions
® product when not in use. Use caution in
returning the device to the custom container so that the trigger on
the control mechanism is not inadvertently depressed and gas is
expelled. Protect the unit against heat when in storage;
temperatures should be between -5° C/23° F to +50° C/122° F to
ensure protection of the device. Cartridges are thermo sensitive.
Do not expose to temperatures above +50° C / 122° F or below
-5° C / 23° F.
Product Warranty
Integra York PA, Inc. warrants that the CryoSolutions ® products
(except the cartridge) shall be free from defects in material and
workmanship under normal use and service for a period of one
(1) year from the date of shipment from Integra. Integra’s sole and
exclusive liability under the warranty shall be, at the manufacturer’s
option, either to repair or to replace any component which fails
during the warranty period due to any defect in workmanship or
material.
1. Customer promptly reports such defect to Integra in writing.
2. If requested by Integra, customer returns equipment
to Integra with shipping charges prepaid.
3. Upon inspection, the manufacturer finds the equipment
to be defective.