Bio-Rad Model EP-1 Econo Pump - Manual (Page 6)

Section 3
Unpacking and Setting Up
3.1 Unpacking Instructions
Carefully remove the unit from the shipping box, lifting from the
handle on the back of the pump or from the bottom of the instrument.
Remove the plastic bag and inspect the instrument for any external damage.
Parts included with the Model EP-1 Econo Pump are illustrated in Figure
3.1. Check off all parts against the supplied packing list.
Your Model EP-1 Econo Pump was carefully tested at the factory and
was shipped in good working order. If any part is missing or damaged,
contact Bio-Rad Laboratories immediately. Refer to Figure 3.1 for the
proper identification designation of any missing or damaged part(s).
Also includes: Instruction Manual
Fig. 3.1. Parts supplied with the Model EP-1 Econo Pump.
Tubing and Fitting
Starter Kit
Power Cord
Model EP-1 Econo Pump
3
M7318140J.qxp 4/17/2006 2:17 PM Page 3